SteelNews.com is a publication created by the Association for Iron and Steel Technology (AIST) for the steel community. We are the leading source for technological and innovative news on the people, producers and suppliers in the North American and international steel communities.

Aceros Arequipa, Peru, recently started up its revamped 40-tonne EAF. The project was conducted as part of the Pisco meltshop upgrade, which is targeting improved billet quality as well as a production output increase to approximately 400,000 tonnes per year.

For the EAF upgrade, Danieli provided new electrode regulation and a complete automation system, as well as a new fume treatment plant for the EAF and LF. Danieli also conducted a comprehensive modernization of the conticaster technological area with new automation system.

Danieli also installed a new burnjector and burners for improved EAF chemical energy utilization. With the new burnjector, the EAF door can remain closed for 95% of the process cycle time, allowing slag volume within the furnace to be increased, which results in higher performances and efficiency.

Following the upgrade, the best EAF performances were a 36-minute turnaround (or 40 heats/day), with a 10% increase in productivity and 22% reduction in electrode consumption. Electrical energy consumption has been lowered from 490 to 420 kWh per tonne of good billets. These results were obtained with a charge mix based on 35 to 40% DRI.

The Pisco minimill also includes a 320,000 tonnes per year bar, light sections and wire rod mill upgraded by Danieli in 2002, and completed in 2004 with the installation of a Danieli high-speed wire rod line.

 Printer-Friendly Version