WORLD HEADLINESWorld
Siemens Supplies Electrical Equipment for Secondary Dedusting System
Feb. 23, 2010 The Siemens Industry Solutions Division has received an order from ArcelorMittal Bremen GmbH to supply the electrical and automation equipment for the new secondary dedusting system in its LD steelworks. The dedusting system is scheduled to be put into operation in the first quarter of 2011.
The construction of this dedusting system is part of a joint multi-location project also involving ArcelorMittal production facilities in Fos-sur-Mer and Florange, France. In Bremen, extraction hoods are to be mounted on the two converters of the LD steelworks and connected to two extraction pipes, each with a diameter of 2.6 m. Control flaps will be able to switch extraction between Converters No. 1 and 2. The extraction pipes will merge into a static mass cooler, where the exhaust gas will be cooled down from between 400 and 500°C to around 120°C to prevent damage to the downstream filter system.
The exhaust gas will be cleaned to a final residual dust content of less than 10 mg/Nm3 before being discharged to the environment through a 54-m-high smokestack. The secondary dedusting system is designed to have a maximum exhausting capacity of 1 million Nm3/h.
For this project, Siemens is providing the flap controllers, filter-cleaning system, dust-discharge system, and fan. The drive solution will use Sinamics G150 frequency converters with IGBT power semiconductors with a power rating of 1350 kW. The automation will be based on Simatic S7 PLCs.
Personnel will use the InTouch HMI system for operator control and monitoring. Siemens will also be responsible for design engineering, installing the electrical equipment, and supervising commissioning and customer training.
Luxembourg-based ArcelorMittal Corp. holds the controlling interest in ArcelorMittal Bremen GmbH. At its Bremen location, the corporation runs an integrated production plant consisting of a blast furnace and LD steelworks, hot- and cold-rolling mills, and two galvanizing lines. It produces hot and cold strip, as well as hot-dip galvanized thin-metal sheeting for customers in the automotive, construction, mechanical engineering, and domestic appliance industries.
The Siemens Industry Sector (Germany) is a leading international supplier of environmentally friendly production, transportation, building and lighting technologies. With around 207,000 employees worldwide (September 30), Siemens Industry achieved in fiscal year 2009 total sales of approximately €35 billion.